|
Specifications Available
|
|
10/10X
|
For general cross cutting of soft and hardwoods and trimming of plywood and particle boards. Standard blades available from 150mm to 600mm diameter.
|
|
20/10HSR
|
Ideal for ripping soft and hardwoods when speed of cut is not important. Standard blades available from 150mm to 600mm diameter.
|
|
6/10FP
|
Designed for the finest finish when cutting formica, plastic, laminates, perspex and acrylic sheets. Standard blades available from 150mm to 450mm diameter.
|
|
6/10mm
|
Ideal for cutting and sizing laminates, melamines, plywood and hardboard panels. Standard blades available from 150mm to 450mm diameter.
|
|
2/10X
|
This sawblade gives superior finish to compound mitre saws, giving a cleaner cut. Standard blades available from 150mm to 600mm diameter.
|
|
F10/10X
|
Designed for chip free cutting for high tolerance joinery, cabinets and picture frame manufacture. Standard blades available from 150mm to 450mm diameter.
|
|
5N/AL
|
For more general non-ferrous cutting. Standard blades available from 150mm to 550mm diameter.
|
|
5N/AL/T
|
This non-ferrous blade is perfect for cutting thin section extrusions. Standard blades available from 150mm to 450mm diameter.
|
|
5/45/ACB
|
The 5 degree negative hook angle allows cutting of thicker materials such as aluminium, brass and copper. Standard blades available from 150mm to 500mm diameter.
|
|
5/UPVC
|
Very thin wall section PVC extrusions give a chip free finish. Standard blades available from 250mm to 330mm diameter.
|
Also available from Ernest Bennett are:
- TCT Panel Sawblades
- TCT Scoring Sawblades
- General purpose Sawblades
- Grooving Sawblades
|
